Skip to main content

3 things has to be done for better performance

 Tips from Goutham:

3 things has to be done for better performance:



By default, XP displays extra graphic objects for menu items which can slow down your display.

1. To turn off these selectively...

Right click My Computer
Select Properties
Click Advanced tab
Under Performance, click Settings button
To turn them all off, select Adjust for best performance

Preference is to leave them all off except for Show shadows under mouse pointer and Show window contents while dragging
2. To speed up the display of the Start Menu Items, turn off the menu shadow.

Right click open area of the Desktop
Select Properties
Click Appearance tab
Click Effects button



Uncheck Show shadows under menus
3. You can increase system performance by loading more of the system into memory. DO NOT attempt this with less then 512MBs of ram. Your system will become unstable.

Click Start
Click Run
Enter regedit
Click OK
Go to
HKEY_LOCAL_MACHINE
SYSTEM
CurrentControlSet
Control
Session Manager
Memory Management
Double click on DisablePagingExecutive
Set Value = 1
Click OK
Reboot



Now you can feel that ur system responsibility superior performance

Comments

Post a Comment

Popular posts from this blog

Calculate how much data can be transferred in 24 hours based on link speed in data center

  In case you are planning for migration via DIA or IPVPN link and as example you have 200Mb stable speed so you could calculate using the below formula. (( 200Mb /8)x60x60x24) /1024/1024 = 2TB /per day In case you have different speed you could replace the 200Mb by any rate to calculate as example below. (( 5 00Mb /8)x60x60x24) /1024/1024 =  5.15TB  /per day So approximate each 100Mb would allow around 1TB per day.
Post a Comment
Read more

Integration with vCloud Director failing after NSXT upgrade to 4.1.2.0 certificate expired

  Issue Clarification: after upgrade from 3.1.3 to 4.1.2.0 observed certificate to be expired related to various internal services.   Issue Verification: after Upgrade from 3.1.3 to 4.1.2.0 observed certificate to be expired related to various internal services.   Root Cause Identification: >>we confirmed the issue to be related to the below KB NSX alarms indicating certificates have expired or are expiring (94898)   Root Cause Justification:   There are two main factors that can contribute to this behaviour: NSX Managers have many certificates for internal services. In version NSX 3.2.1, Cluster Boot Manager (CBM) service certificates were incorrectly given a validity period of 825 days instead of 100 years. This was corrected to 100 years in NSX 3.2.3. However any environment originally installed on NSX 3.2.1 will have the internal CBM Corfu certs expire after 825 regardless of upgrade to the fixed version or not. On NSX-T 3.2.x interna...
Post a Comment
Read more

Recreating a missing VMFS datastore partition in VMware vSphere 5.x and 6.x

    Symptoms A datastore has become inaccessible. A VMFS partition table is missing.   Purpose The partition table is required only during a rescan. This means that the datastore may become inaccessible on a host during a rescan if the VMFS partition was deleted after the last rescan. The partition table is physically located on the LUN, so all vSphere hosts that have access to this LUN can see the change has taken place. However, only the hosts that do a rescan will be affected.   This article provides information on: Determining whether this is the same problem Resolving the problem   Cause This issue occurs because the VMFS partition can be deleted by deleting the datastore from the vSphere Client. This is prevented by the software, if the datastore is in use. It can also happen if a physical server has access to the LUN on the SAN and does an install, for example.   Resolution To resolve this issue: Run the  partedUtil  command on the host wit...
1 comment
Read more